Tester kablova UT681C

Opis

The test device used in testing network cables is used to check whether cables such as telephone, Ethernet, HDMI and BNC are short circuited, conductive, crossed or open circuited. Control and testing can be carried out very quickly. In order to test RJ45, RJ11 and BNC cables, the use of RJ45 and BNC adapter is required. Fast and slow test modes can be followed with Led1, Led8 and Led-G. The Unit cable tester gets its power from a 9V battery. Short, open and cross circuit control can be done automatically. It is a solid and durable product with its high quality structure. The measurement process can be easily performed with a single button. Necessary controls can be easily made from the LED status indicator on the device. The low battery indicator is an important feature for easy and quick monitoring of battery status. The test device can be easily turned off manually when desired, or it can automatically turn off after 10 minutes of non-use. This provides power savings. In terms of areas of use, it is preferred for weekly installation of the current system circuit as well as maintenance and necessary inspections.

- For testing: RJ45/RJ11/BNC: You need to use RJ45 to BNC adapter,

- Quick test mode: LED1~LED8, LED_G,

- Slow test mode: LED1~LED8, LED_G,

- To test for short circuit, crossover, open circuit etc.,

- Ethernet cable: shielded/unshielded test,

- Manual shutdown function,

- Automatic power off function,

- One-click operation,

- Power source: 9V battery,

- Low battery detection Less than 7.2V,

- Working temperature: 0~40℃,

- Storage temperature: -10~50℃,

- Working humidity: 20~80% Relative Humidity,

- Storage humidity: 10~90% Relative Humidity,

- Altitude: ≤2000 meters,

- Safety standard: CE EN61326-1: 2013/EN61326-2-2: 2013,

- Product color: red and grey,

- Product net weight: Transmitter: 87g, Receiver: 51g,

- Product size: Receiver: 102 mm x 37 mm x 28 mm,

- Standard accessories: 9V battery, BNC to RJ45 adapter.