Tester šuko utičnica PCW06B

Opis

Quickly and easily checks earthed sockets for correct connection. Wiring errors such as missing PE, N, and L conductors, as well as the interchange of L and PE conductors, are clearly indicated via three LEDs. A test button triggers 30 mA residual current devices (RCDs). An easy-to-understand status table provides information about the correct connection and the type of fault in the earthed socket.

- Ideal for testing a standard 220-240V socket,

- Plug in the power cord and check whether your electrical installation has been completed correctly,

- Test button for the 30mA FI test to see if your FI circuit breaker also trips (RCD test button),

- If you press the RCD button or FI button, your FI circuit breaker or FI protection switch in the control cabinet must trigger,

- A really useful tool that no electrician, technician or service case should be without!

- Ideal for your electrical case, workshop, service and training area,

- Socket tester with FI tester, LCD voltage display and 3-way LED status display,

- Socket tester with voltage display and 30mA FI circuit breaker tester (RCD test button),

- 7 LED display modes for verification and testing via three integrated LEDs,

- Rapid tester developed according to safety standard CAT-II- 300V / IEC 61010-1,

- In a modern design and solid protective frame,

- Easy-to-read LCD display with backlight (LCD display 18x11mm),

- No battery is required, just plug it into the socket and you're done,

- 3-pin safety plug,

- Measuring range and operating voltage 48-250Volt AC 45-65HZ / Accuracy +/-2%,

- RCD-FI test >30mA / RCD working voltage 220V +/-20V,

- Dimensions: 62x62mm D: 25mm with plug = 62mm,

- For further details on the 3 LEDs (diagnostic LEDs) see further pictures!

- Included accessories: Operating instructions (German, English, French, Portuguese, Italian).